Twisted box dieline
Free twisted box dieline template: a square box whose top is turned against its bottom, eight triangle walls, a tuck lid and a 1-2-3 bottom that locks without glue. Enter the side and the height; get a print-ready PDF with cut and crease lines.
About this dieline
About this dieline
A twisted box is a square box whose top is turned 45° against its bottom. The walls between them are eight triangles, four pointing down and four pointing up, so the box looks cut like a gem. It is one piece of board, glued along one seam; geometry calls the shape a square antiprism. The top closes with a tuck lid over two dust flaps, the bottom with a 1-2-3 lock.
Enter the side of the square, the height of the closed box and the board thickness, and download a print-ready PDF with cut and crease lines. White paperboard of 0.35–0.6 mm is usual. It ships flat and suits sweets, favours, jewellery and small gifts. Need to carry it? Pick a handle top: an upright plate or two arches.
What size do I need?
Measure what goes in: the side of the square must clear its widest point plus 1–2 mm, the height its height plus 1–2 mm. Corner to corner the box is about 1.4 times the side, so leave that much room on a shelf. Templates and makers list sizes like 50 × 50 mm for a favour and 120 × 120 mm for a gift.
Does it need glue?
Only on the side seam, which the box maker glues. The bottom locks without glue: its four flaps fold in one after the other and lock together. The lid tucks inside a wall, so the box opens and closes again without tape.
Twisted box sizes: square boxes turned at the top, with eight triangle walls →