Skip to content
Dieline Studio
Open the dieline
Size charts

Size chartsUpdated

Twisted box sizes

A twisted box is a square box whose top is turned 45° against its bottom, with eight triangle walls between them (a square antiprism). It folds from one piece of paperboard, glued along one seam, and closes with a tuck lid or a carry handle.

Tuck lid

ForSide × heightDieline
Party favour 50 × 50 mm
2.0 × 2.0
Make this dieline →
Gift box 120 × 120 mm
4.7 × 4.7
Make this dieline →
Large gift box 180 × 180 mm
7.1 × 7.1
Make this dieline →

Handle plate

ForSide × heightDieline
Starting size 120 × 118 mm
4.7 × 4.6
Make this dieline →
Gift box 120 × 120 mm
4.7 × 4.7
Make this dieline →
Large gift box 180 × 180 mm
7.1 × 7.1
Make this dieline →

Arch handle

ForSide × heightDieline
Starting size 120 × 118 mm
4.7 × 4.6
Make this dieline →
Gift box 120 × 120 mm
4.7 × 4.7
Make this dieline →
Large gift box 180 × 180 mm
7.1 × 7.1
Make this dieline →

Sizes from box templates and one maker, not a standard. Measure what goes in before you order.

How to measure

  • Side: one side of the square top, the same as the bottom. Make it at least the widest point of what goes in, plus 1–2 mm.
  • Height: the height of the closed box, bottom to top, without the handle: what goes in plus 1–2 mm.

Our sizes are crease to crease. Corner to corner the box is about 1.4 times the side, so a box with a 100 mm side needs about 141 mm of shelf space. A handle top needs a side of at least 90 mm, so the hand hole fits; the handle stands about a third of the side above the top.

Which board?

Twisted boxes are usually made from white paperboard about 0.5 mm thick (350 g), which folds the many slanted creases cleanly and prints well. Heavier solid board makes a stiffer premium box. Corrugated board is too thick for this many folds.

Related guides

Feedback

A link or a photo of a sample, plus the sizes you need, saves us guessing.

so we can write back