Pyramid top box dieline

Free pyramid top box dieline template: a square box with a pointed four-sided top, tied at the tip with a ribbon, and a tuck bottom. Enter the side, the wall height and the top; get a print-ready PDF with cut and crease lines.

About this dieline Pyramid top box dieline template: cut, fold and safe-area lines

About this dieline

A pyramid top box is a square box whose four walls rise into a pointed top. The walls fold in at the top into four triangles that meet at the tip, and the corners between them fold in half and tuck inside, so none show. It is one piece of board, glued along one seam, with a tuck bottom: two dust flaps, then the bottom panel with its tuck.

Enter the side of the square, the wall height, the top height (or leave it automatic) and the board thickness, and download a print-ready PDF with cut and crease lines and the four ribbon holes. White paperboard of 0.3–0.55 mm is usual. It ships flat and suits wedding favours, sweets, candles, soaps and Christmas baubles.

How does the top stay closed?

With a ribbon. Each of the four faces has a small hole just under the tip; thread one ribbon through all four, pull it tight and tie a bow. The top has no lock of its own, so the ribbon is what holds it shut, and it opens again by untying the bow.

How tall should the top be?

Left at automatic, the pyramid rises about 0.6 of the side over the walls, which suits sweets and small gifts. Make it taller for anything narrower at the top: a frosted cupcake, a bauble with its cap, a small bottle. It cannot go lower than 0.6 of the side, or the corners would not fold inside.

Pyramid top box sizes: square favour and gift boxes that rise to a point →