Hang tag dieline
Free hang tag dieline template. Enter width and height, pick beveled or square corners and the hole; get a print-ready PDF at true size.
About this dieline
About this dieline
A hang tag is the small card tied to a shirt, a gift or a jar with a string through its hole. It carries your brand, the price or a few words about the product, and it is one of the simplest things you can print and cut.
Enter the width and height, pick beveled or square top corners, and set the hole: its size and how far below the top edge it sits. You get a PDF at true size with the cut outline, the hole and the printable area 3 mm inside the edge. A business card sized tag of 2 × 3.5 in (51 × 89 mm) is the most common.
How big should the hole be?
About 6 mm takes a string, and that is the default. Its centre sits 8 mm below the top edge. Make it smaller for a thin thread, or 0 to leave it out.
What are beveled corners?
Both top corners are cut off at 45°, the classic tag shape. The cut grows with the width, about a sixth of it. Pick square for a plain rectangle.
Hang tag sizes: clothing and gift tags from 2 × 2 in to 3 × 5 in →