Skip to content
Dieline Studio
Open the dieline
Size charts

Size chartsUpdated

Ball box sizes

A ball box is a round gift box made of 26 flat faces. It folds from one piece of paperboard, is glued once at the side and opens at the top, so it suits a Christmas bauble, sweets or a small surprise.

ForBall insideDieline
Christmas bauble, Ø 50 mm Ø 60 mm
2.4
Make this dieline →
Large bauble, Ø 80 mm Ø 86 mm
3.4
Make this dieline →
Sweets Ø 100 mm
3.9
Make this dieline →
Gift ball Ø 120 mm
4.7
Make this dieline →
Large gift Ø 189 mm
7.4
Make this dieline →

Three sizes from box templates, two sized by us round a real bauble. Measure what goes in before you order.

How to measure

  • Diameter: the widest ball that fits inside. Measure the widest part of what goes in and add 2–4 mm. Outside, the box is about 4 mm wider, and it is as tall as it is wide.

A bauble's cap and hook point toward a corner of the box, where there is a little more room. Our sizes are crease to crease.

Which board?

These boxes are usually made from white paperboard about 0.5 mm thick (350 g). It folds cleanly along the many short edges and prints well. Thinner board, 250–300 g, suits a small box. Corrugated board is too thick: the small corners between the faces fold double inside.

Related guides

Feedback

A link or a photo of a sample, plus the sizes you need, saves us guessing.

so we can write back