Skip to content
Dieline Studio
Open the dieline
Size charts

Size chartsUpdated

Paper cup sizes

A paper cup is sized by three numbers: across the rim, across the bottom and its height. Here are four ready sizes of single wall hot cup, each taken from a real cup maker's die, so you can start from the one closest to yours.

Size chart

CupTop Ø × bottom Ø × heightSimilar on saleDieline
4 oz · 118 ml
Espresso
62.3 × 45.9 × 60.6 mm
2.45 × 1.81 × 2.38
4 oz, 118 ml: 62 × 46 × 60 mm Make this dieline →
8 oz · 250 ml
The standard cup for coffee or tea
75.7 × 51.1 × 97.5 mm
2.98 × 2.01 × 3.84
9 oz, 250 ml: 75 × 53 × 90 mm Make this dieline →
12 oz · 355 ml
A large coffee
79.9 × 51.0 × 117.2 mm
3.14 × 2.01 × 4.62
12 oz, 360 ml: 79 × 52 × 112 mm Make this dieline →
16 oz · 473 ml
An extra large coffee, a latte or tea
87.8 × 61.6 × 114.6 mm
3.45 × 2.43 × 4.51
Make this dieline →

One maker's cups, not a standard. Cups on sale differ from maker to maker, so use your own cup's sizes if you have them: the dieline takes any size.

How to measure

  • Top Ø: across the rim, over the rolled edge, as the cup maker lists it.
  • Bottom Ø: across the bottom edge the cup stands on.
  • Height: overall, from that bottom edge to the top of the rim.

Your cup is a different size?

Type your own sizes into the fields and the dieline follows them. The rim curl, the bottom fold and the glue zone come from your cup maker's die, so copy those too. Print one at 1:1 and check it against a real cup before the run.

Where the design goes

Keep text and logos inside the blue dashed safe area: the top of the print rolls into the rim and the bottom turns under the base. To design on a flat rectangle instead of the curve, switch the drawing to Template and download it, then upload your design to see it bent onto the cup in 3D.

Need a sleeve for the cup? See the cup sleeve sizes.

Related guides

Feedback

A link or a photo of a sample, plus the sizes you need, saves us guessing.

so we can write back