One bottle wine carrier dieline

About this dieline

A one bottle wine carrier is a tall box that holds a bottle upright and is carried by a handle on top. It ships flat and pre-glued: open it and the bottom snaps into place. The top of each side folds in, the front and back lean together, and a flap from the back comes down over the front, its hand hole over theirs, and locks with a tab. A tall window in the front shows the label; its cut-out folds in and holds the bottle.

Enter the length, width and height and the board, switch the window on or off, and download a print-ready PDF with cut and crease lines. It suits wine, beer, oil or any single bottle sold or given as a gift.

What size do I need for a 750 ml bottle?

Stock carriers for a standard wine bottle are 89 × 89 × 381 mm (3½ × 3½ × 15 in). The height is the whole wall: its top 90 mm fold in to the handle, so the bottle stands under that line and its neck goes up into the top. For a slimmer bottle measure it at its widest point and add 2–3 mm.

Does it need glue?

Only where the box maker glues it: the side seam and the self-locking bottom. At the counter it opens with the bottom in place, the top folds in and the handle flap locks with a tab, no tape or glue.

Wine carrier sizes: carry boxes for one, two or three bottles, with a handle and windows →