Size charts
- Stand up pouch sizes
- Coffee bag sizes
- Flat bottom pouch sizes
- Flat pouch sizes
- Pillow pouch sizes
- Stick pack sizes
- Sachet sizes
- T-shirt bag sizes
- Wicket bag sizes
- Die-cut handle bag sizes
- Loop handle bag sizes
- Mailer bag sizes
- Paper bag sizes
- Pinch bottom paper bag sizes
- Baguette bag sizes
- French fry bag sizes
- Mailer box sizes
- Shipping box sizes
- Tuck lid shipping box sizes
- Tab lock mailer sizes
- Tissue box sizes
- Carry handle box sizes
- Shoe box sizes
- Octagon box sizes
- Wine carrier sizes
- Roof box with handle sizes
- Pizza slice box sizes
- Slice tray sizes
- Beer box sizes
- Open tray sizes
- Gift box sizes
- Drawer box sizes
- Cake box sizes
- Display box sizes
- French fries box sizes
- Gable box sizes
- Cake box with handle sizes
- Popcorn box sizes
- Tuck box sizes
- Hang tab box sizes
- Crash lock bottom box sizes
- Snap lock bottom box sizes
- Pillow box sizes
- Pizza box sizes
- Burger box sizes
- Cup sleeve sizes
- Hang tag sizes
- Envelope sizes
- Pocket folder sizes
- Self-locking folder sizes
- Closed folder sizes
Size chartsUpdated
Wine carrier sizes
A wine carrier holds one, two or three bottles upright, with a handle on top and a window on the front for each bottle. Stock carriers for 750 ml bottles come in a few sizes; for a beer, an oil or a slimmer bottle, start from the tables and fit the numbers to your bottles.
One bottle
| For | Length × width × height | Dieline |
|---|---|---|
| Wine, 750 ml The stock size |
89 × 89 × 381 mm 3.5 × 3.5 × 15.0 |
Make this dieline → |
| Wine, 750 ml A snug fit |
76 × 76 × 388 mm 3.0 × 3.0 × 15.3 |
Make this dieline → |
| Beer, 650 ml (22 oz) | 76 × 76 × 369 mm 3.0 × 3.0 × 14.5 |
Make this dieline → |
| Beer, 355 ml (12 oz) | 64 × 64 × 312 mm 2.5 × 2.5 × 12.3 |
Make this dieline → |
Sizes sold or recommended by carrier makers, not a standard. Check them against your bottle.
Two bottles
| For | Length × width × height | Dieline |
|---|---|---|
| Two bottles, 750 ml The stock size |
178 × 89 × 381 mm 7.0 × 3.5 × 15.0 |
Make this dieline → |
| Two bottles, 750 ml A shorter carrier |
184 × 94 × 357 mm 7.2 × 3.7 × 14.1 |
Make this dieline → |
Three bottles
| For | Length × width × height | Dieline |
|---|---|---|
| Three bottles, 750 ml The stock size |
270 × 89 × 381 mm 10.6 × 3.5 × 15.0 |
Make this dieline → |
| Three bottles, 750 ml A shorter carrier |
279 × 88 × 357 mm 11.0 × 3.5 × 14.1 |
Make this dieline → |
How to measure
- Length: across the front, the side with the windows, crease to crease.
- Width: front to back. A one bottle carrier is usually square: length and width the same.
- Height: the whole wall, from the bottom to the top edge.
- Measure the bottle at its widest point and add 2–3 mm to length and width, so it slides in.
- Two or three bottles: they stand side by side across the front, so the length is each bottle's width plus 2–3 mm, times the number of bottles. The windows' flaps fold in between the bottles and keep them apart.
How tall?
The top 90 mm of the walls fold in to the handle, so the carrier is full width only up to 90 mm below the height you enter. The bottle's shoulder should sit under that line and its neck goes up into the narrowing top. For a 300 mm wine bottle that means a height of about 380 mm, the stock size.
Which board?
Stock carriers are E flute corrugated, about 1.5 mm, which carries a full bottle safely. F flute (1 mm) is lighter; paperboard of 0.4–0.6 mm is fine for a gift that is not carried far. The board doesn't change the sizes you enter.
Need a carry box for something wider, or a pack of six? Have a look at the roof box with handle sizes and the beer box sizes.