Skip to content
Dieline Studio
Open the dieline
Size charts

Size chartsUpdated

Triangle pyramid box sizes

A triangle pyramid box stands on a triangle and narrows to a small triangle lid, like a pyramid with its tip cut off. It folds from one piece of paperboard, glued along one seam; the bottom and the lid lock without glue, so the lid opens and closes again.

ForSide × heightDieline
Party favour 100 × 47 mm
3.9 × 1.9
Make this dieline →
Golf ball 110 × 46 mm
4.3 × 1.8
Make this dieline →
Christmas bauble, Ø 60 mm 160 × 74 mm
6.3 × 2.9
Make this dieline →

One size from a box template, two sized by us round a real product. Measure what goes in before you order.

How to measure

  • Side: one side of the triangle the box stands on.
  • Height: the height of the closed box, bottom to lid. It can be at most 0.47 of the side, because the walls lean in: the taller the box, the smaller the lid.

The walls lean in, so the box holds less than its bottom suggests. A round thing, a ball or a bauble, fits when its diameter is at most 0.4 of the side; something flat fits when it lies inside the bottom triangle, a third of its own height in from each edge. Our sizes are crease to crease.

Which board?

These boxes are usually made from white paperboard about 0.5 mm thick (350 g), which takes the slanted creases cleanly and prints well. A lighter 250–300 g board suits small favours. Corrugated board is too thick for the slotted lid.

Related guides

Feedback

A link or a photo of a sample, plus the sizes you need, saves us guessing.

so we can write back