Skip to content
Dieline Studio
Open the dieline
Size charts

Size chartsUpdated

Cone box sizes

A cone box is a pointed gift box on a square base: four triangle walls rise to one tip, like a small pyramid or a Christmas tree. It folds from one piece of paperboard, glued along one seam, and is filled from the bottom, which locks without glue.

ForBase × heightDieline
Truffle 51 × 76 mm
2.0 × 3.0
Make this dieline →
Christmas treat 75 × 95 mm
3.0 × 3.7
Make this dieline →
Sweets 76 × 76 mm
3.0 × 3.0
Make this dieline →
Wedding favour 89 × 108 mm
3.5 × 4.3
Make this dieline →
Tall gift 100 × 193 mm
3.9 × 7.6
Make this dieline →
Candle 114 × 152 mm
4.5 × 6.0
Make this dieline →

Sizes that shops sell pyramid favour boxes in, and one from a box template. Measure what goes in before you order.

How to measure

  • Base: one side of the square the box stands on.
  • Height: from the table to the tip of the closed box. It must be at least 0.6 of the base.

The walls lean in to a point, so the box holds less than its base suggests, and what goes in sits low. At a height h the box is only base × (1 − h/height) wide: a sweet 40 mm across and 30 mm tall fits a 76 mm base in a box 76 mm tall. Our sizes are crease to crease.

Which board?

These boxes are usually made from white paperboard about 0.5 mm thick (350 g), which takes the long slanted creases cleanly and prints well. A lighter 250–300 g board suits small favours. Corrugated board is too thick for the point, where five layers meet.

Related guides

Feedback

A link or a photo of a sample, plus the sizes you need, saves us guessing.

so we can write back