Skip to content
Dieline Studio
Open the dieline
Size charts

Size chartsUpdated

Toy gift box sizes

A toy gift box is a paperboard carton whose front is a little door: it drops open like a cabinet door to show the toy inside and locks shut again with a tab. It folds from one piece of board with a glued back, so it ships flat and makes a gift feel special.

ForLength × width × heightDieline
Puzzle cube 60 × 60 × 60 mm
2.4 × 2.4 × 2.4
Make this dieline →
Toy gift box 101 × 92 × 101 mm
4.0 × 3.6 × 4.0
Make this dieline →
Plush toy 83 × 83 × 153 mm
3.3 × 3.3 × 6.0
Make this dieline →
Building set 144 × 64 × 125 mm
5.7 × 2.5 × 4.9
Make this dieline →
Vinyl figure 117 × 92 × 162 mm
4.6 × 3.6 × 6.4
Make this dieline →

Sizes worked out round each toy and one box template, not stock sizes. Measure what goes in before you order.

How to measure

  • Length: side to side, across the front door.
  • Width: front to back, along the side walls.
  • Height: how tall the box stands, bottom to top. The door is as tall as the box.

Measure the toy, or the box it already comes in, and add 2–3 mm each way: a 57 mm puzzle cube takes a 60 × 60 × 60 mm box. A soft toy can be squeezed a little, a boxed figure cannot. Our sizes are crease to crease.

Which board?

These boxes are made from white paperboard about 0.5 mm thick (350 g): stiff enough for a door that opens again and again, thin enough to fold cleanly. Use 300 g for a small cube or a figure, 400 g for a heavier set. Corrugated board is too thick for the door's lock.

Related guides

Feedback

A link or a photo of a sample, plus the sizes you need, saves us guessing.

so we can write back