Pizza box dieline
Free pizza box dieline template: the one-piece corrugated delivery box with bevelled front corners, a hinged lid and vents, locked without glue. Enter length, width, height and the board; get a print-ready PDF with cut and crease lines.
About this dieline
About this dieline
A pizza box is the flat delivery box pizzerias use: one sheet of corrugated board, a lid hinged on the back wall, two vents in the back and the two front corners cut off at an angle. Each corner locks itself: a strip folds over the corner wall and down inside it, and its tip goes into a slot in the floor. No glue, no tape, and it opens flat again for the bin.
Enter the length, width and height and the board thickness, and download a print-ready PDF with cut and crease lines. Sizes are crease to crease, the way box makers quote them; the board only moves the corner locks, the lid and the slots, so the box keeps its size.
Sizes to start from, length × width × height: about 240 × 240 × 42 mm for a 9-inch (23 cm) pizza, 310 × 310 × 45 mm for 12 inches, 355 × 355 × 45 mm for 14 inches, 406 × 406 × 42 mm for a 16-inch family pizza and 457 × 457 × 51 mm for an 18-inch one. One pizzeria's large is another's medium, so measure your own pizza before you order.
What size box for my pizza?
A little bigger than the pizza, so the crust doesn't rub the walls: a 12-inch (30 cm) pizza usually goes in a box about 310 × 310 mm. The pizza box sizes guide lists the usual sizes.
How deep should it be?
About 40–50 mm for a regular pizza. Deep-dish or stuffed crust needs 65–75 mm, so the lid doesn't touch the toppings.
Which board is a pizza box made from?
Thin corrugated board. E flute, 1.5 mm, is the default: light and stiff. For an extra-large or heavy pizza pick B flute, 2.8 mm. The box keeps its size; only the corner locks, the lid and the slots make room for the board.
How do I fold it?
Fold the side walls, the front wall and the two corner walls up. Fold the small triangles at the ends of the walls in against each corner wall, then fold the corner strip over the top and down inside them and push its tip into the slot in the floor. Fold the back wall up, the side walls' end flaps inside it. The lid folds the same way, then shuts over the box, and its front flap tucks in behind the front wall.
Pizza box sizes: from a 9-inch pizza to an 18-inch family one →