Hinged lid display box dieline

Free hinged lid display box dieline template: a one-piece paperboard box whose lid stays attached and whose front folds down, so it stands open on a shelf or counter showing sweets or small goods. Enter the sizes and the board; get a print-ready PDF with cut and crease lines.

About this dieline Hinged lid display box dieline template: cut, fold and safe-area lines

About this dieline

A hinged lid display box is a one-piece paperboard box for the shop counter. Its tray locks together without glue, and its lid stays attached at the back and drops over the walls like a shoe box lid. Lift the lid, fold the front wall down, and the box stands open on the shelf showing what is inside; close it again to store or carry it. A half-round notch in the lid's front edge lets a finger lift it.

Enter the width across the front, the depth and the height, pick the board, and download a print-ready PDF with cut and crease lines. White paperboard of 0.4–0.6 mm is usual. It ships flat and suits lollipops, chocolate bars, lip balms, candles, a cupcake or small gifts.

How do I size it?

Lay the goods out as they will sit in the box, measure the group and add 2–3 mm each way: across the front is the length, front to back the width, and how tall it stands under the lid the height. Eighteen lollipops in three rows of six take about 153 × 93 × 78 mm.

Does it need glue?

The box itself needs none: its double side walls lock into the floor with tabs, and the front tucks its rounded ears into them. The two grey GLUE zones on the lid's corners are optional: without glue the lid's sides can spring open when you lift it, a dot of glue keeps the lid square.

Hinged lid display box sizes: counter boxes that open up to show sweets and small goods →